ASHLY NE 1600.70

SKU : NE 1600.70

SGD 3,020.00
Availability: Out of stock

Network Amplifier, 2 X 800W @ 70V


A blank panel on the rear allows you to install an optional CobraNet CNM-2 card for CobraNet capability, or an AES/EBU input to support digital audio. Other useful amplifier functions include DC voltage control, preset recalls, and remote power standby. LED indicators provide you with at-a-glance knowledge of power, standby, network, protection circuitry, audio levels, operating mode, temperature, and current.




  • The rackmount design allows you to install the amplifier in any standard equipment rack for use in a studio or other venues
  • Choose between stereo or bridged operating modes for flexible performance
  • A 10/100 Ethernet port allows you to monitor and control amplifier functions over a network with the Proteanesoftware
  • XLR and Euroblock inputs and Aux outputs are provided, along with Speakon and Euroblock speaker outputs
  • Each input has its own stepped and calibrated attenuator knob
  • An input slot on the rear panel allows you to add an optional CobraNet CNM-2 card or an AES/EBU input for added functionality
  • The amplifier features DC voltage control and remote power on/off via software
  • Built-in protection circuitry shields the amplifier against damage from overloads and overheating
  • The amplifier has 4-level signal and clip LEDs, as well as LED indicators that display power, standby, protect, network, temperature, current, and power switch disable status
  • Temperature-sensitive variable-speed fans keep the internal components cool for reliable operation
Power Rating

450W/Channel @ 8Ω

800W/Channel @ 4Ω

1600W @ 8Ω Bridged

Damping Factor > 250
Input Sensitivity 26 or 32dB, or 1.4V (Switch-Selectable)
Input Impedance 20 kOhms, Balanced
Gain Variable
Frequency Response 20Hz - 20kHz ±1dB
Signal-to-Noise Ratio > 105dB
Total Harmonic Distortion (THD) < 0.5%

2 x XLR Inputs

2 x Euroblock Inputs

2 x XLR Aux Outputs

1 x Euroblock Aux Output

2 x Speakon Outputs

1 x Euroblock Speaker Output

1 x 10/100 Ethernet Port

1 x Remote Euroblock Connector

1 x Input Expansion Slot
1 x AC Power Input


1 x Power Switch

2 x Level Control Knobs

1 x Mode Selector Switch

1 x High Pass Filter Switch

1 x Sensitivity Selector Switch


2 x 4-Segment Level/Clip LED Meters

2 x Temperature LEDs

2 x Current LEDs

1 x Bridge LED

1 x Power LED

1 x Standby LED

1 x Protect LED

1 x Power Switch Disable LED


Cooling Variable-Speed Fan, Front-to-Back Airflow
Power Consumption 0.6A, 40W (1/8 Idle)
Power Requirements 100-220VAC
Dimensions (HxWxD) 3.5 x 19 x 15.5" (89 x 483 x 392mm)
Weight 21 lbs (9.5kg)


Click here for full specs